Details
2012 Tidewater 230 CC — Yamaha F250 Four Stroke, 652 Hours Seafoam green hull, fiberglass hardtop, and a Yamaha 250 on the transom. This is the 23-foot Tidewater that does everything right for New England water: fish it hard, run it offshore on a good day, and still have it be easy to launch, trailer and store. The 230 CC is built on a deep-V hull with moderate bow flare — 8'10" beam, 15" draft, about 3,200 lbs — so it's dry, stable, and punches well above its length in a chop. Sea trial numbers back it up: 23 kts at 4000 RPM, 30 kts at 5000, and 38.8 kts wide open at 5950 — right in Yamaha's spec band. Power is a Yamaha F250TXR six-cylinder four stroke with 652 hours, turning a Yamaha Saltwater Series II 15.25" x 19" stainless prop. Compression tested at 173–177 psi across all six cylinders with only 2.2% variance — a tight, healthy motor with plenty of life left. Fishing package is dialed: large aerated livewell, insulated fish boxes, raw water washdown with 12V pump, transom-mount transducer, and rod storage throughout. Helm has a Garmin GPSmap 541s chartplotter/sounder, Ritchie compass, Yamaha analog gauges, and Yamaha top-mount controls. Lenco electric trim tabs, SeaStar hydraulic steering, JBL AM/FM stereo with four speakers, 12V horn, and full navigation lighting. Deck hardware is all done right — five 6.5" stainless pop-up cleats, stainless grab rails, white PVC rub rail with stainless insert, telescoping three-step stainless swim ladder off the port side, and a curved acrylic windscreen with Isinglass side and front panels. Console compartment is plumbed and sized for a porta-potti. 103-gallon polyethylene fuel tank gives it real range. Dual Deka group 24 batteries with selector switch, 1100 GPH Rule automatic bilge pump. Trailered on a 2018 Venture aluminum tandem-axle trailer, 6,025 lb capacity, 2" ball — a genuine turn-key package. Hook up and go. Professionally surveyed pre-purchase by a SAMS accredited marine surveyor — hull moisture readings normal throughout, no blistering, no delamination, solid stem and transom, clean bilges. Survey available to serious buyers. Priced at $39,999. Serviced and detailed by Ravosa Marine Services. Trades considered, financing available, sea trials welcome.
Boat Details
Hull ID (HIN)
NLPHC113G112
Engines
Engine Detail
Engine 1: Yamaha, Yamaha F250, 250 horsepower, 652 hrs
Additional Information
Disclaimer The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.